|
|
|
|
|
|
Programmer Accessories
|
ICD to 10-Pin Ribbon Adapter
|
 This
adapter allows you to use Programming
Adapters and LAB-X Experimenter
Boards with the Microchip ICD and ICD2.Just plug
the modular cable from the Microchip ICD(2) into the adapter
and connect the 10-pin ribbon to the ICSP header found on
a Programming Adapter or LAB-X Board. Some
PIC Proto Boards have
the ICSP header, also.
With the proper adapter, the ICD(2) can be used to program
loose surface mount, PLCC, and DIP packages. The ICD(2)
can be used with a LAB-X board to program a part in-circuit
and step through the code for debugging.
|
|
|
Programmer Parallel Cable
|
 2.0m
long 25-pin parallel printer extension cable to connect
your EPIC Plus Programmer
to your computer's parallel printer port. |
|
|
Programmer Serial Cable
|
 2.0m
long 9-pin cable to connect your
Serial Programmer to your
computer's serial port. (DB9 male to DB9 female) |
|
|
Programmer USB Cable
|
 2.0m
long USB cable to connect your USB Programmer or
U2 USB Programmer to your
computer's USB port. (USB A plug to USB B plug) |
|
|
Programmer AC Adapter
|
 AC
Adapter for the EPIC Plus
Programmer or the Serial
Programmer.Input: 220-240V AC, 50Hz
Output: 15V DC @ 500mA
Note: Only AC Adapters
fitted with a UK or European type plug are available. The
appropriate AC Adapter will be sent with your order as determined
by your delivery address. The supplied AC Adapter may not
resemble the one displayed.
|
|
|
|
|
|
|
|
|
Page Updated:
22/12/09
|
|
|
|
Copyright © 2002-2010
Warburton Technology
|
|
|
Cable
for interfacing your 
