|
|
Solutions Cubed Motor Mind C |
|
Single or dual DC motor controller
|
| 003-004 | Motor Mind C | £37.50 | 10%
OFF | £33.75 | buy now | 16 IN
STOCK | info |
|
- Controls 1 or 2 brushed 6-24VDC motors
- Up to 2.25A (per motor)
- Serial mode
- Analogue mode (0-5VDC)
- R/C mode (1.0-2.0ms PWM)
- 1.2KHz or 19.2KHz PWM (serial only)
- 40 pin DIP 0.6" wide footprint
|
 |
|
| The Motor Mind C provides control of one or two
small brushed DC motors. Motor speed and direction can be controlled
up to 2.25A continuous current per motor. This module is ideal for
controlling small robotic systems. The Motor Mind C accepts serial
commands, but may also be configured for analogue control inputs
(0-5VDC where 2.5V is stopped) or radio control signals (1.0-2.0ms
signals where 1.5ms is stopped). The module can also operate with
dynamic or free-running brake modes. PWM frequency defaults to 1.2KHz,
but in serial mode can be increased to 19.2KHz with a reduction
in low duty-cycle resolution (minimum on-time is roughly 8%).
The dual H-bridges on the product come equipped with over-temperature
and over-current protection. The status of the H-bridges can be
read if operating in serial mode, and an LED indicator lights if
a fault condition has occurred.
This product works well with controllers such as Microchip
PIC microcontrollers or Parallax
BASIC Stamp modules. The
Motor Mind C BS2
Carrier Board is designed to make connections to the BASIC Stamp
simple and easy to execute.
|
|
|
|
|
|
Motor
Mind C BS2 Carrier Board
The Motor Mind C BS2 Carrier Board was designed to simplify
connectivity to, and control of, the Motor Mind C. It can
also be used to implement application notes involving the
Parallax BASIC Stamp 2 series of programmable controllers.
12V Active Cooling
System
This fan, hardware, and connector kit can be used with a
system employing the Motor Mind C to increase continuous
current handling capability to 4.0A.
Easy Roller Robot Wheel Kit
The Easy Roller Robot Wheel Kit was designed to simplify
mechanical mounting requirements for small robotic projects.
This product replaces mechanical mounting systems with a
dependable solid structure and provides an easy-to-implement
method of engineering a skid-steering drive system.
|
|
|
|
Arduino
