|
|
Solutions Cubed ICON BS2 Carrier Board |
|
BASIC Stamp 2 carrier board, for use with the
ICON Interface Module
|
| 003-011 | ICON BS2 Carrier Board | £26.25 | 20%
OFF | £21.00 | buy now | 4 IN
STOCK | info |
|
- Can control 1 or 2 ICON Interface Module / H-Bridge
combinations
- BASIC Stamp is powered by ICON Interface Module
- Forms excellent electronics package for medium sized
robotic drive systems
- DB9 BASIC Stamp programming port
- Mounting holes for mounting 1 or 2 ICON Interface
Module / H-Bridge assemblies
|
Please note that the ICON BS2 Carrier Board above is shown
assembled together with the additional ICON components attached.
|
|
|
The ICON BS2 Carrier Board was designed to simplify connectivity
to, and control of, 1 or 2 ICON Interface Modules / H-Bridge assemblies
with the Parallax BASIC Stamp 2. It can be used to implement application
notes involving the BASIC Stamp 2
series of programmable controllers.
|
|
|
|
|
|
ICON H-Bridge Module
The ICON H-Bridge provides easy connectivity and logic level
control of brushed DC motors to 40V and 12A. An on board
microcontroller can be accessed via standard serial communication,
and provides temperature and current monitoring, as well
as user defined temperature and current fuse settings.
ICON Serial Adapter
Simplifies connectivity of the ICON Interface Module to
a PC. Provides test points, analogue output, and connectivity
to Microchip's DV164002 for customization of PIC16F873 firmware
used on the ICON Interface Module (see AN601).
ICON Position
Controller
PID based position controller for use with brushed DC motors
equipped with quadrature encoders. Direct, Analogue, Velocity,
or Trapezoidal control modes with 32 bit position control.
Can act as a stand alone position controller or will work
under control of a master unit. Operates with the ICON H-Bridge
configured in direct drive mode.
ICON Interface
Module
Can act as the ICON H-Bridge Programmer. Other features
of this design include uni-directional and bi-directional
analogue control, serial 8N1, or motor speed control for
use with the ICON H-Bridge. Set point based speed control
system, or direct PWM control via communication interface.
ICON Communication
Module
The ICON Communication Module is designed to simplify testing
and development of projects requiring RS232 or RS485 serial
communication level conversion. The device can be mounted
directly to the ICON Interface Module, ICON Position Controller,
or the Mini Position Controller using supplied stand-offs
and ribbon cable hardware.
|
|
|
|
Arduino
