PicBasic Pro Code Samples for the LAB-X3 Experimenter Board

PicBasic Pro program to blink an LED connected to PORTB.4 about once a second.

source code

PicBasic Pro program to simulate an LCD Backpack.

source code

PicBasic Pro program to show button press on LED.

source code

PicBasic Pro program for an LCD clock using ON INTERRUPT. Uses TMR0 and prescaler. Watchdog Timer should be set to off at program time and NAP or SLEEP should not be used. Buttons may be used to set time.

source code

PicBasic Pro program to show binary count on 2 LEDs.

source code

PicBasic Pro program to send 'Hello World' on serial port.

source code

PicBasic Pro program to send and receive from the hardware serial port. LEDs count characters and flash error if none received for 10 seconds.

source code

PicBasic Pro program to display 'Hello World' on LCD.

source code

PicBasic Pro program to read a potentiometer and display on LCD.

source code

PicBasic Pro program to move an RC servo using buttons. Button 1 moves servo left, 2 moves servo right. Press both buttons to centre servo.

source code

PicBasic Pro program to test LAB-X3 Experimenter Board.

source code

PicBasic Pro program to demonstrate an upper case serial filter.

source code

PicBasic Pro program to display potentiometer on 2 segment bargraph. The last LED in the graph dims or brightens with changes in the potentiometer.

source code