|
|
|
|
|
|
LAB-X Boards |
| | | 005-001 | LAB-X1 Experimenter Board | £149.96 | buy now | 5 IN
STOCK | info |
| | | | 005-004 | LAB-X2 Experimenter Board | £59.96 | buy now | 4 IN
STOCK | info |
| | | | 005-006 | LAB-X3 Experimenter Board | £89.96 | buy now | 6 IN
STOCK | info |
| | | | 005-010 | LAB-XUSB Experimenter Board | £134.97 | buy now | 3 IN
STOCK | info |
| |
These boards are available fully assembled with an assortment
of popular peripheral hardware. When combined with an in-circuit programmer and
a Flash PIC microcontroller, the result is an incredibly fast system for developing
projects. The LAB-X1 Board includes most of the circuitry
commonly used with PIC microcontrollers, the LAB-X2 Board
is a low-cost board that allows you to build your own circuitry and interface via
a 40-pin connector, the LAB-X3 Board provides a full
complement of hardware peripherals for an 18-pin microcontroller and the
LAB-XUSB Board includes USB circuitry for use with
USB enabled PIC microcontrollers. A range of Experimenter
Bundles are available that include all you need to get started. |
Micro Engineering Labs LAB-X1 Experimenter Board |  | This board provides an assembled testbed including most of the circuitry commonly used with PIC microcontrollers. It includes a 20x2 LCD panel, 16 button keypad, serial port with 9-pin D connector, programmable oscillator, speaker, and more. Accepts 40-pin devices. (16F877 recommended) information | | 005-001 | LAB-X1 Experimenter Board | £149.96 | buy now | 5 IN
STOCK | info |
| Micro Engineering Labs LAB-X2 Experimenter Board |  | A low-cost board that allows you to build your own circuitry and interface via a 40-pin connector. Includes 4MHz oscillator, power supply, serial port with 9-pin D connector, and more. Accepts either 28 or 40-pin devices. (16F876 or16F877 recommended) information | | 005-004 | LAB-X2 Experimenter Board | £59.96 | buy now | 4 IN
STOCK | info |
| Micro Engineering Labs LAB-X3 Experimenter Board |  | This board provides a full complement of hardware peripherals for an 18-pin microcontroller. Many different projects may be created using the LAB-X3. Some examples include an LCD clock, servo controller, LCD backpack, and many more. (16F84 or16F628 recommended) information | | 005-006 | LAB-X3 Experimenter Board | £89.96 | buy now | 6 IN
STOCK | info |
| Micro Engineering Labs LAB-X USB Experimenter Board |  | The LAB-XUSB is a platform for experimenting with PIC microcontroller (MCU) applications. It is recommended the LAB-XUSB be used with the 40-pin PIC18F4550. This flash device is equipped with the USB module necessary to build USB peripherals. information | | 005-010 | LAB-XUSB Experimenter Board | £134.97 | buy now | 3 IN
STOCK | info |
| |
|
|
|
|
|
Page Updated:
20/12/11
Content: © 2002-2012
Warburton Technology
Design: © 2002-2012
Warburton Internet
|
|
|
|
|
|
|
Tel: +44 7814 044 754 - Fax: +44 8715 283 948 - Skype: warburtech.co.uk
Warburton Technology, 33 Selkirk Close, Wimborne, Dorset, BH21 1TN, United Kingdom
VAT Number: GB 846 917 877
|
|
|
|
|
|
Arduino
