|
|
Parallax BASIC Stamp BS2E-IC |
|
 |
Using the Ubicom SX microcontroller, the BASIC Stamp BS2E-IC runs at the same
speed as the BS2-IC, but has the RAM and EEPROM size benefits of the BS2SX-IC, without
the speed and power consumption. Ideal for those who use the BS2-IC and would like
more variable or program space.
|
|
The BS2E-IC may be easily programmed with one of our Carrier Boards and a Serial
Cable. More information about these accessories may be found
here.
The BS2E-IC is also available in a Starter Kit which includes a
Super Carrier Board, an
AC Adapter and a Serial Cable; everything you
need to get your project off to a flying start. More information about our BASIC
Stamp Starter Kits may be found here.
|
|
|
|
|
|
| Package |
24-pin DIP module |
| Size |
1 3/16” L x 5/8” W x 3/8” H |
| Environment |
0-70 °C (32-158 °F) |
| Microcontroller |
Scenix SX28AC |
| Processor Speed |
20 MHz |
| Program Speed |
~4,000 instructions/sec. |
| RAM |
32 Bytes (6 I/O, 26 variable) |
| Scratch Pad RAM |
64 Bytes (for interprogram sharing) |
| EEPROM (Program) Size |
8x2K Bytes, ~4,000 instructions |
| Number of I/O Pins |
16 + 2 Dedicated Serial |
| Voltage Requirements |
5-12 VDC |
| Current Draw @ 5V |
20 mA Run / 100 µA Sleep |
| Source/Sink Current per I/O |
30 mA / 30 mA |
| Source/Sink Current per unit |
60 mA / 60 mA per 8 I/O pins |
| PBASIC Commands |
39 |
| PC Programming Interface |
Serial Port (9600 baud) |
| DOS Text Editor |
STAMP2E.EXE |
| Windows Text Editor |
Stampw.exe (v1.096 and up) |
|
|
|
|
|
|
BASIC Stamp BS2E-IC Starter Kit
|
 |
Includes:
|
| 001-012 | BASIC Stamp BS2E-IC Starter Kit | £62.96 | buy now | 27 IN
STOCK | info |
|
|
|
|
|
|
Arduino
