 The
LAB-X3 Experimenter Board provides a full complement of hardware
peripherals for an 18-pin microcontroller such as the
PIC16F84 or
PIC16F628.The LAB-X3 includes the circuitry required by the
PIC microcontroller to operate: 5-volt power supply, oscillator,
reset circuit, as well as an RS-232 serial port, 2-line x 20-character
LCD module, and basic analogue and digital I/O. The board is designed
to accommodate 18-pin MCUs, including the popular
PIC16F84A and the new PIC16F62x.
Many different projects may be created using the LAB-X3. Some
examples include LCD clock, servo controller, LCD backpack, and
many more. The LAB-X3 can run programs written in assembler, C and
PicBasic or
PicBasic Pro. Sample
programs are included.
The in-circuit programming connector allows the resident PIC
microcontroller to be reprogrammed on the fly (requires flash device)
using programmers that support this feature like the
EPIC Plus Programmer,
Serial Programmer,
USB Programmer or
U2 USB Programmer. It is recommended the LAB-X3 be used with
the 18-pin
PIC16F628 or
PIC16F84A (available separately). These flash devices may be
reprogrammed again and again.
| Compatible with the 18-pin PIC16C554, 16C558, 16C61,
16C620(A), 16C621(A), 16C622(A), 16C71, 16C710, 16C711,
16C712, 16C715, 16C716, 16C717, 16C84, PIC16CE623, 16CE624,
16CE625, PIC16F627,
16F628, 16F83,
16F84(A) The
PIC16F628 or
PIC16F84A is recommended.
|
The LAB-X3 is also available in convenient, cost-saving bundles.
See our Experimenter Bundles page
for more information.
LAB-X3 Board Features:
- Inputs: 1 pushbutton, 1 potentiometer
- Outputs: 2 LEDs, 1 RC servo connector, 2x20 LCD module
- I/O: RS232 interface
- Misc: Reset button (may be programmed as input with the
16F62x MCUs), 5-volt regulator, 4MHz crystal oscillator
- In-circuit programming connector
- Prototyping area for additional circuits
- Size is 4.9" x 3.30"
|
Solar
