|
|
|
|
|
|
GSM Accessories
|
GSM Easyfit Antenna
|
 The
GSM Easyfit Antenna is a high performance interior antenna
designed for use with the new generation of cellular mobile
networks. A quad-band antenna, suitable for 850MHz, 900MHz,1800MHz
and 1900MHz networks, it is compatible with our
TC35i Terminal,
MC35i Terminal and
TC65 Terminal. It comes with
3m of cable and is terminated with a female FME connector.
It has a self-adhesive backing for easy installation and
is suitable for any indoor, outdoor or automotive application. |
|
|
GSM Patch Antenna
|
 The
GSM Patch Antenna is a high performance interior antenna
designed for use with the new generation of cellular mobile
networks. A quad-band antenna, suitable for 850MHz, 900MHz,1800MHz
and 1900MHz networks, it is compatible with our
TC35i Terminal,
MC35i Terminal and
TC65 Terminal. It comes with
3m of cable and is terminated with a female FME connector.
It has a self-adhesive backing for easy installation and
is suitable for any indoor, outdoor or automotive application. |
|
|
GSM Magnetic Antenna
|
 The
GSM Magnetic Antenna is a high performance interior antenna
designed for use with the new generation of cellular mobile
networks. A quad-band antenna, suitable for 850MHz, 900MHz,1800MHz
and 1900MHz networks, it is compatible with our
TC35i Terminal,
MC35i Terminal and
TC65 Terminal. It comes with
2m of cable and is terminated with a female FME connector.
It has a magnetic base for easy installation and is suitable
for any indoor, outdoor or automotive application. |
|
|
Siemens Terminal Power Supply
|
 A
power supply which has been specifically designed for use
with the TC35i Terminal,
MC35i Terminal or
TC65 Terminal. The output cable
is terminated with an RJ11 plug which connects directly
to your modem. An AC Cable is included to connect to your
local mains supply.input: 100-240V AC, 50-60Hz
output: 12V DC @ 2.5A
Note: Only AC Cables fitted
with a UK or European type plug are available. The appropriate
AC Cable will be sent with your order as determined by your
delivery address.
|
|
|
Siemens Terminal Power Cable
|
 This
cable allows you to easily connect a power supply to your
TC35i Terminal,
MC35i Terminal or
TC65 Terminal. The cable is
terminated with an RJ11 plug at the modem end and is unterminated
at the power supply end.The unterminated end of the Siemens
Terminal Power Cable must be connected to your power supply
as follows:
| Signal |
Wire Colour |
Description |
Power Supply |
| + |
Black |
Positive supply |
+V |
| IGT_IN |
Blue |
Ignition input |
+V (optional)* |
| GND |
Orange |
Ground |
GND |
* IGT_IN may be permanently connected to + (black and
blue wires tied together) to ensure that the terminal is
immediately switched to the active state when power is applied.
|
|
|
 TC65 Terminal I/O
Cable
|
 300mm
cable for connecting the I/O port of your
TC65 Terminal to the outside
world. The cable is terminated with a 24 pin Micro-N-Lok
connector at the modem end and is unterminated at the other
end. |
|
|
|
|
|
|
|
|
Page Updated:
22/12/09
|
|
|
|
Copyright © 2002-2010
Warburton Technology
|
|
|
TC65 Terminal
2.0m
long, 9-pin cable to connect the serial port of your
