| @ |
Insert one line of assembly language code. |
| ADCIN |
Read on-chip analogue to digital converter. |
| ASM..ENDASM |
Insert assembly language code section. |
| BRANCH |
Computed GOTO (equivalent to ON..GOTO). |
| BRANCHL |
BRANCH out of page (long BRANCH). |
| BUTTON |
Debounce and auto-repeat input on specified pin. |
| CALL |
Call assembly language subroutine. |
| CLEAR |
Zero all variables. |
| CLEARWDT |
Clear (tickle) Watchdog Timer. |
| COUNT |
Count number of pulses on a pin. |
| DATA |
Define initial contents of on-chip EEPROM. |
| DEBUG |
Asynchronous serial output to fixed pin and baud. |
| DEBUGIN |
Asynchronous serial input from fixed pin and baud. |
| DISABLE |
Disable ON DEBUG and ON INTERRUPT processing. |
| DISABLE DEBUG |
Disable ON DEBUG processing. |
| DISABLE INTERRUPT |
Disable ON INTERRUPT processing. |
| DTMFOUT |
Produce touch-tones on a pin. |
| EEPROM |
Define initial contents of on-chip EEPROM. |
| ENABLE |
Enable ON DEBUG and ON INTERRUPT processing. |
| ENABLE DEBUG |
Enable ON DEBUG processing. |
| ENABLE INTERRUPT |
Enable ON INTERRUPT processing. |
| END |
Stop execution and enter low power mode. |
| FOR..NEXT |
Repeatedly execute statements. |
| FREQOUT |
Produce up to 2 frequencies on a pin. |
| GOSUB |
Call BASIC subroutine at specified label. |
| GOTO |
Continue execution at specified label. |
| HIGH |
Make pin output high. |
| HPWM |
Output hardware pulse width modulated pulse train. |
| HSERIN |
Hardware asynchronous serial input. |
| HSEROUT |
Hardware asynchronous serial output. |
| I2CREAD |
Read from I2C device. |
| I2CWRITE |
Write to I2C device. |
| IF..THEN..ELSE..ENDIF |
Conditionally execute statements. |
| INPUT |
Make pin an input. |
| LCDIN |
Read from LCD RAM. |
| LCDOUT |
Display characters on LCD. |
| {LET} |
Assign result of an expression to a variable. |
| LOOKDOWN |
Search constant table for value. |
| LOOKDOWN2 |
Search constant / variable table for value. |
| LOOKUP |
Fetch constant value from table. |
| LOOKUP2 |
Fetch constant / variable value from table. |
| LOW |
Make pin output low. |
| NAP |
Power down processor for short period of time. |
| ON DEBUG |
Execute BASIC debug monitor. |
| ON INTERRUPT |
Execute BASIC subroutine on an interrupt. |
| OWIN |
One-wire input. |
| OWOUT |
One-wire output. |
| OUTPUT |
Make pin an output. |
| PAUSE |
Delay (1ms resolution). |
| PAUSEUS |
Delay (1us resolution). |
| PEEK |
Read byte from register. |
| POKE |
Write byte to register. |
| POT |
Read potentiometer on specified pin. |
| PULSIN |
Measure pulse width on a pin. |
| PULSOUT |
Generate pulse to a pin. |
| PWM |
Output pulse width modulated pulse train to pin. |
| RANDOM |
Generate pseudo-random number. |
| RCTIME |
Measure pulse width on a pin. |
| READ |
Read byte from on-chip EEPROM. |
| READCODE |
Read word from code memory. |
| RESUME |
Continue execution after interrupt handling. |
| RETURN |
Continue at statement following last GOSUB. |
| REVERSE |
Make output pin an input or an input pin an output. |
| SELECT CASE |
Compare a variable with different values. |
| SERIN |
Asynchronous serial input (BS1 style). |
| SERIN2 |
Asynchronous serial input (BS2 style). |
| SEROUT |
Asynchronous serial output (BS1 style). |
| SEROUT2 |
Asynchronous serial output (BS2 style). |
| SHIFTIN |
Synchronous serial input. |
| SHIFTOUT |
Synchronous serial output. |
| SLEEP |
Power down processor for a period of time. |
| SOUND |
Generate tone or white-noise on specified pin. |
| STOP |
Stop program execution. |
| SWAP |
Exchange the values of two variables. |
| TOGGLE |
Make pin output and toggle state. |
| USBIN |
USB input. |
| USBINIT |
Initialize USB. |
| USBOUT |
USB output. |
| WHILE..WEND |
Execute statements while condition is true. |
| WRITE |
Write byte to on-chip EEPROM. |
| WRITECODE |
Write word to code memory. |
| XIN |
X-10 input. |
| XOUT |
X-10 output. |
All math operations are unsigned and performed with 16-bit precision.
The operators supported are:
*Implementation differs from BASIC Stamp.
16x2 Serial LCD
