|
BASIC Stamp BS2E-IC
|
|
 |
Using the Ubicom SX microcontroller, the BASIC Stamp
BS2E-IC runs at the same speed as the BS2-IC, but has the
RAM and EEPROM size benefits of the BS2SX-IC, without the
speed and power consumption. Ideal for those who use the
BS2-IC and would like more variable or program space.
|
|
The BS2E-IC may be easily programmed with one of our
Carrier Boards and a Serial Cable. More information about
these accessories may be found
here.
The BS2E-IC is also available in a Starter Kit which
includes a Super Carrier
Board, an AC Adapter
and a Serial Cable; everything
you need to get your project off to a flying start. More
information about our BASIC Stamp Starter Kits may be found
here.
|
|
Technical Data
|
| Package |
|
24-pin DIP module |
| Size |
|
1 3/16” L x 5/8” W x 3/8” H |
| Environment |
|
0-70 °C (32-158 °F) |
| Microcontroller |
|
Scenix SX28AC |
| Processor Speed |
|
20 MHz |
| Program Speed |
|
~4,000 instructions/sec. |
| RAM |
|
32 Bytes (6 I/O, 26 variable) |
| Scratch Pad RAM |
|
64 Bytes (for interprogram sharing) |
| EEPROM (Program) Size |
|
8x2K Bytes, ~4,000 instructions |
| Number of I/O Pins |
|
16 + 2 Dedicated Serial |
| Voltage Requirements |
|
5-12 VDC |
| Current Draw @ 5V |
|
20 mA Run / 100 µA Sleep |
| Source/Sink Current per I/O |
|
30 mA / 30 mA |
| Source/Sink Current per unit |
|
60 mA / 60 mA per 8 I/O pins |
| PBASIC Commands |
|
39 |
| PC Programming Interface |
|
Serial Port (9600 baud) |
| DOS Text Editor |
|
STAMP2E.EXE |
| Windows Text Editor |
|
Stampw.exe (v1.096 and up) |
|
|
|
|
|
|
BASIC Stamp BS2E-IC Starter Kit
|
 |
Includes:
|
|
|
|
|
|
|
