BASIC Stamp Accessories
|
BASIC Stamp 2 Carrier Board
|
 The
BASIC Stamp 2 Carrier Board has a 24-pin DIP socket for the
BS2-IC,
BS2E-IC,
BS2SX-IC, and
BS2P24-IC modules. The board
also contains: through-hole prototype area, battery clip, and reset
button. A 9V battery is required but not included. Measures 8.1
x 6.6 cm. |
|
 BASIC Stamp Super Carrier
Board
|
 The
BASIC Stamp Super Carrier Board supports the JS1-IC,
BS1-IC,
BS2-IC,
BS2E-IC,
BS2SX-IC,
BS2P24-IC, BS2PE, and BS2PX
modules and provides wire-wrap prototyping space and holes placed
to accommodate DIP ICs.
The Super Carrier Board has the following features:
- 3" x 4" Double-sided plated through-hole prototype board
- Sockets support BS1-IC, JS1-IC, and all 24 pin BS2 modules
- On-board voltage regulator accepts 6-30 VDC, from AC Adapter
or battery
- Serial programming port (DB9) can be used for run-time communication
(BS2 series)
- Prototype area (1.5" x 2.0") holes arranged to easily support:
servos, 300 and 600 mil DIP ICs, DB9, DB25, RJ-11 connectors
- AppMod header for easy expansion
- Size measures 7.7 x 10.2 cm (3"x 4")
|
|
BASIC Stamp Serial Cable
|
 2.0m
long, 9-pin cable to connect the serial port of your BASIC Stamp
2 Carrier Board or BASIC Stamp Super Carrier Board to your computer.
(DB9 male to DB9 female) |
|
BASIC Stamp AC Adapter
|
 AC
Adapter for the BASIC Stamp Super Carrier Board.Input: 220-240V
AC, 50Hz
Output: 12V DC @ 500mA
Note: Only AC Adapters fitted
with a UK or European type plug are available. The appropriate AC
Adapter will be sent with your order as determined by your delivery
address. The supplied AC Adapter may not resemble the one displayed.
|
|
|
16x2 Serial LCD
