SRF02
Ultrasonic Rangefinder
Lowest cost ultrasonic rangefinder with both I2C and Serial
interfaces. New AutoTune algorithms intelligently back the
minimum range right up to the transducer ringdown for the
very best performance possible, automatically, in the background,
and with no calibration cycles necessary. Find out more
here.
LAB-XUSB Experimenter
Board
The LAB-XUSB is a platform for experimenting with PIC microcontroller
(MCU) applications. It is recommended the LAB-XUSB be used
with the 40-pin PIC18F4550. This flash device is equipped
with the USB module necessary to build USB peripherals.
Find out more here.
U2 USB Programmer
The new and improved model of the popular melabs USB Programmer
now offers even more features than before! More than 300
PIC microcontrollers are supported! Support for future devices
can be added via FLASH firmware updates. Intelligent voltage
regulation allows programming of the new, low-voltage PIC®
MCUs as well as standard five-volt devices. Find out more
here.
16x2 Serial LCD
Module
The 16x2 Serial LCD Module from melabs can display serial
data from either an asynchronous RS232-style input or a
synchronous I2C input. A range of baud rates from 2400 to
57,600 are available and the serial data is buffered so
that no delay is necessary when transmitting. The display
includes an LED backlight with variable brightness. Find
out more here.
LCD6402 128x64
Graphic LCD
The LCD6402 is a low cost, intelligent, graphic liquid crystal
display module featuring I2C interface, 32K-bytes of nonvolatile
memory and a keypad interface. Adding one to your embedded
project couldn't be easier. Find out more
here.
Download free graphics development
software for this product
here.
Siemens TC65 Terminal
The TC65 Terminal with Java™ technology is the missing link
between M2M applications and the world of IPbased services
involving GSM/GPRS communication. The TC65 Terminal offers
a complete software development platform with which to create
licence-free, hardware independent applications. Find out
more here.
LCD03 20x4 LCD
Module
The LCD03 20x4 LCD Module includes an integrated display
driver which can operate in either I2C or Serial mode. It
requires only a 5V power supply and two data connections
for either mode. A backlight is also included, which may
be switched on and off under software control.
BASIC Stamp®
is a registered trademark of Parallax, Inc.
The Microchip name and logo, PIC and PICmicro are registered trademarks
of Microchip Technology Inc.
Translation service provided by
Google. Flags
courtesy of American
International Consultants.
16x2 Serial LCD
